We provide the latest update software for the Built-in Cam
-
Target model
-
G80, GV80, GV70
-
G80, GV80, GV70
- How to use
-
Download the update file for each vehicle type to the USB memory from the ‘Built-in Cam Update > Download’ menu.
The update file cannot be executed on the PC. Do not decompress, download to USB memory as it is, and immediately update the vehicle without any separate procedure.
-
Insert the downloaded USB memory into the vehicle’s Built-in Cam USB terminal and proceed with the update.
It is necessary to connect to the Built-in Cam USB terminal not the navigation USB terminal, and the location of the Built-in Cam USB terminal by vehicle type is as follows.
-
Download the update file for each vehicle type to the USB memory from the ‘Built-in Cam Update > Download’ menu.
Model
|
USB terminal location
|
G80, GV80
|
Console box
|
GV70
|
Top left of glove box
|
※
For detailed update method, refer to the‘Built-in Cam Update > Update method’ menu.
Depending on the installed software version, the path of the update menu may be different.
Built-in Cam update contents
-
Apply the new home screen
-
The recording function can be easily set on the Built-in Cam home screen.
-
The recording function can be easily set on the Built-in Cam home screen.
-
Initialize the Built-in Cam setting during initialization of the infotainment system user profile
-
When initializing the infotainment system user profile, the Built-in Cam setting of the profile is also linked to initialize.
-
When initializing the infotainment system user profile, the Built-in Cam setting of the profile is also linked to initialize.
Caution
-
Proceed with the update with the officially provided update file. If you change the file name of the update file, it will not be updated normally, and the Built-in Cam may not work properly.
- When updating using a USB memory, it is recommended to format the USB memory before copying the update file.
-
File system formatted in FAT16 / FAT32 / NTFS /exFAT format is supported. In some cases, certain USB memory products may notwork properly.
-
File system formatted in FAT16 / FAT32 / NTFS /exFAT format is supported. In some cases, certain USB memory products may notwork properly.
- When downloading the file, check the vehicle model correctly. When downloading update files for other models, the update may not proceed or the Built-in Cam may not work properly.
- Disconnect the USB disk after file copying from the PC is completely finished. If you disconnect while copying files, the files may be damaged and may not be updated normally.
- For in-vehicle update method and instructions, refer to the ‘Built-in Cam Update > Update method’ menu.
- It is recommended to keep the navigation / Built-in Cam software up to date. If thenavigation / Built-in Cam software is not the latest version, graphics maydiffer of functions may not work properly.
- If the Built-in Cam does not work properly due to installation failure during the update, visitthe nearest service center.
- If file download is not easy, you can get support for Built-in Cam update through the service center.
-
Depending on the service center, the update preparation period is required, so contact usafter inquiring in advance.
-
When updating throughthe service center, separate labor fees may be charged.
-
Depending on the service center, the update preparation period is required, so contact usafter inquiring in advance.